Softail Gauge Relocation

  For our Gauge Relocation, we started out by merging two of the highest quality materials, REAL Carbon Fiber and billet 6061 air-craft grade aluminum to bring you the lightest gauge relocation for your softail. This Gauge Relocation was originally designed for the 4"...

  For our Gauge Relocation, we started out by merging two of the highest quality materials, REAL Carbon Fiber and billet 6061 air-craft grade aluminum to bring you the lightest gauge relocation for your softail. This Gauge Relocation was originally designed for the 4"...

  If you are purchasing New OG Risers on our site today, you will not need to worry about this.  If you ALREADY have our risers, you can double check if you have these 1/4-20" drilled and tapped holes on the underside of your top...

  If you are purchasing New OG Risers on our site today, you will not need to worry about this.  If you ALREADY have our risers, you can double check if you have these 1/4-20" drilled and tapped holes on the underside of your top...

  This piece is ONLY required if you would like to run your Gauge Relocation on the front of your OG Risers. It is an extension that you add to the mount to be able to reach to the front of the risers.  12...

  Use your Thrashin Road Glide Gauge Relocation Mount with your Thrashin Holeshot Risers.  Billet 6061 T6 Aluminum 12 Point ARP Hardware included Two Allen bolts included Made in U.S.A Hard Anodized Black

  Gauge Relocation Bracket. Mounts off of THRASHIN OG Risers. Billet 6061 Aluminum Hard Black Anodized 12 Point ARP Hardware included Two Allen bolts included Made in U.S.A. If you are currently running the THRASHIN OG Risers and your top clamp does not have...

  22" Plug and Play wire harness for FXDLS 4" Gauge.  Stock OEM Wire is 20" Long.  This is the wire harness we used for the Lowrider ST with 9.5" Thrashin Risers. If you are going with 6.5" or shorter risers, the stock cable...

Features Relocate the stock gauge and bracket to the upper portion of the T-bar risers Billet aluminum construction Accept gauge brackets that attach to the handlebar clamp 4-3/16" on-center mount holes Made in the U.S.A.

Features Relocate the stock gauge and bracket to the upper portion of the T-bar risers Billet aluminum construction Accept gauge brackets that attach to the handlebar clamp 4-3/16" on-center mount holes Made in the U.S.A.

Features 2:1 replacement-style speedo head comes with trip set, bulb and socket Year Brand Model 1983-1984 Harley-Davidson FXSB Low Rider - Beltearly: 1984 1981 Harley-Davidson FXEF Fat Bob 1980-1982 Harley-Davidson FXB Sturgis 1979-1980 Harley-Davidson 1200 Super Glide FXE 1979-1980 Harley-Davidson Super Glide 80 FXE...

Features Chrome housing 1" Clamp fits 7/8" and 1" diameter handlebars includes all necessary mounting hardware Notes Uses SR626SW battery Features black and silver face  

Features Chrome housing 1" Clamp fits 7/8" and 1" diameter handlebars includes all necessary mounting hardware Notes Uses SR626SW battery Features black and silver face

Features Billet aluminum construction Two-piece clamp-on design Fit most 1-1/4" T-Bars with 3-1/2" on-center pullback risers Made in the USA Notes Not for use with XL880C/1200C OEM gauge. Gauge mounts without cups; may require the use of an OEM gasket.

Features Billet aluminum construction Two-piece clamp-on design Fit most 1-1/4" T-Bars with 3-1/2" on-center pullback risers Made in the USA Notes Not for use with XL880C/1200C OEM gauge. Gauge mounts without cups; may require the use of an OEM gasket.

Remote oil psi gauge/line kit allow mechanics or owners to check engine oil pressure using a quality liquid-filled mechanical psi gauge while keeping the factory electronic gauge and/or low oil pressure indicator light hooked up Great tool for verifying actual engine oil pressure and...