NEWSLETTER SIGN UP
Receive our latest updates about our products and promotions.
GET THE MOST OUT OF YOUR M-EIGHT!
The FEULING® billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling vented dipsticks screw into the factory oil fill spout as a stock replacement part. These breathing dipsticks remove unwanted build-up of blow by pressure in the oil tank.
Blow by is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank. FEULING® dipsticks help remove this unwanted pressure through a (CVS) Crankcase Ventilation System. Test results show a decrease in engine oil sump levels, more freely/smoother revving engine, increased MPG and decreased blow-by.
NOTE: All internal combustion engines have a certain amount of blow by. Larger cubic inch engines as well as engines with worn and or loose ring clearances will have increased blow by.
We include 2 venting styles (Options) to choose from when installing the dipstick:
OPTION 1.) 1/8 NPT breather vent fitting with internal porous filter element. This option gives a clean look however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by.
OPTION 2.) Quick disconnect coupler fitting with rubber hose and filter element. This option will run any excessive oil misting/residue through the line and into the filter element. However this option does requires disconnecting the fitting in order to check the oil. This is Feulings preferred option as it breaths more than option 1.
For option 2, we recommend routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.
Available in polished or fade resistant black finish
*This dipstick does get hot, use a glove when checking oil level
TECH TIP: Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help maintain ring seal and minimize blow by.
Checking oil level
There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU).
FHS = FULL HOT STAND If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand).
FHU = FULL HOT UPRIGHT When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright).
OIL LEVEL - DO NOT OVERFILL OIL TANK
It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot.
Note: The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.
We recommend the following steps to achieve proper oil level:
1. Check cold oil level.
2. Ride the bike until operating temperature is reached.
3. Shut the bike off while still in the upright position. (This insures an accurate reading)
4. Once the bike is on the kickstand check oil level.
5. Add or remove oil as needed
M8 baggers 17-22
Fitments
YEAR |
MAKE |
MODEL |
2022 |
Harley-Davidson |
Road Glide ST FLTRXST |
2022 |
Harley-Davidson |
Street Glide ST FLHXST |
2022 |
Harley-Davidson |
CVO Road Glide Limited |
2021 |
Harley-Davidson |
Electra Glide Revival |
2020-2022 |
Harley-Davidson |
Road Glide Limited FLTRK |
2020 |
Harley-Davidson |
CVO Tri Glide FLHTCUTGSE |
2019-2022 |
Harley-Davidson |
Electra Glide Standard EFI FLHTI |
2018-2022 |
Harley-Davidson |
CVO Road Glide Custom FLTRXSE |
2017-2022 |
Harley-Davidson |
Road Glide Special FLTRXS |
2017-2022 |
Harley-Davidson |
Street Glide EFI FLHX |
2017-2022 |
Harley-Davidson |
Road King Special FLHRXS |
2017-2022 |
Harley-Davidson |
Road Glide Custom FLTRX |
2017-2022 |
Harley-Davidson |
Street Glide Special FLHXS |
2017-2022 |
Harley-Davidson |
Electra Glide Ultra Limited FLHTK |
2017-2022 |
Harley-Davidson |
CVO Street Glide FLHXSE |
2017-2022 |
Harley-Davidson |
Road King EFI FLHR |
2017-2021 |
Harley-Davidson |
CVO Electra Glide Ultra Limited FLHTKSE |
2017-2021 |
Harley-Davidson |
Electra Glide Police FLHTPI |
2017-2020 |
Harley-Davidson |
Freewheeler FLRT |
2017-2020 |
Harley-Davidson |
Tri Glide Ultra Classic FLHTCUTG |
2017-2019 |
Harley-Davidson |
Electra Glide Ultra Limited Low FLHTKL |
2017-2019 |
Harley-Davidson |
Road Glide Ultra FLTRU |
2017-2019 |
Harley-Davidson |
Electra Glide Ultra Classic EFI FLHTCUI |
Disclaimer: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.
Shipping
Domestic U.S. Orders over $500.00 USD are eligible for free shipping, with the exception of orders including select products like FXRP fairing kits and oil change kits.
To return your product, please mail it to: 9027 Canoga Ave, Unit I, Canoga Park, CA 91304, United States.
You will be responsible for paying your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Our policy lasts 30 days.
Late or Missing Refunds (if applicable):
Please Note:
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Receive our latest updates about our products and promotions.
Thanks for subscribing!
This email has been registered!